Recently Viewed Products
Community Poll
Product Description
The ADVANCE SEVEN container from Basik is probably the most comfortable container and harness on the market today!
After more than a year of testing, the engineers at BASIK AIR CONCEPT, are proud to release the ADVANCE SEVEN harness/container!
Construction
The true secret of Basik Air Concept success lies in our experience and our attention to detail.
We work to the absolute highest standards of design and build quality found anywhere in the industry.
Basik Air Concept is not the largest container manufacturer in the industry, but we are committed to being the best that there is.
Harness design
The ADVANCE SEVEN is designed to take your comfort to new levels whilst increasing the overall harness strength.
It is one of only a few systems on the market today that have passed the TSO-C23d standard.
This means that the ADVANCE SEVEN container system has been thoroughly tested and approved for heavier weights at higher speeds.
With the ADVANCE SEVEN your rig moves with you, not against you to ensure unsurpassed levels of fit and comfort.
The ADVANCE SEVEN harness was specifically designed to flex at the natural junction points of the human body.
This design has helped to eliminate harness buckling and twisting.
Your harness is then custom made to your unique measurements.
Reserve container
Our unique reserve container uses proven technology with the no side flaps configuration, one of the strongest pilotchutes in the industry and the AAD protected cutter directly under the pilotchute on the kicker plate flap.
These features give you the fastest reserve opening system ever seen.
The pilot chute spring force gives an energy which is maximised because of the 'no side flaps' concept.
Reserve bag
The unique design of the reserve freebag gives you ease of packing and durability.
The ADVANCE SEVEN uses the same material as your container.
It is very strong and resistant to wear and tear.
Riser covers
Most of todays riser cover systems have problems with them at some point.
The ADVANCE SEVEN riser covers were designed with our special flexible patented magnets incorporated into them.
Magnetic riser covers are a significant improvement over previous designs.
Not only does this feature provide added security in freefall, it also results in super clean openings as the tension on both riser covers is evenly distributed.
Hard Housings
By clamping the cable housing ends together, we ensure that your cables stay correctly routed without losing flexibility.
All hard housings are made from high-quality stainless steel.
Terminal ends
BASIK AIR CONCEPT has upgraded the cable housing terminal-end to a single piece cast stainless steel part which is only found in our harness systems.
These pieces are significantly more expensive than the other terminal ends (which are actually electrical connectors) used by the rest of the industry, but we believe they provide an extra degree of security in this critical safety area.
Pin protective flap
This has been revised for even better main pin protection and peace of mind!
The basic design remains the same,but the flap has been made wider for extra security.
Anti-Line Twist Main D-Bag
Line twists can be a real problem, especially with today's elliptical canopies.
We have reduced this problem with an innovative way of stowing the canopy lines.
The new bag keeps all lines and stows
This ensures line tension during deployment at the center of the bag instead of on the sides (otherwise the bag could oscillate back and forth - potentially leading to line twists!!).
Main container side flaps
We have made the main side flap ends curved to minimise the chance of a line snag during the main parachute deployment.
Throw out Pouch (BOC)
To avoid the hassle of replacing a spandex BOC pocket every 200-300 jumps, we also offer a new pouch which is designed for the container.
It is manufactured with the same material as the container to reduce wear and tear.
We have also developed a larger, spacious pouch to allow the pilot chute to be flattened, giving the bottom of the container a cleaner, sleek look.
It is secured using our unique magnetic security system with our Freefly Handle (Pud).
Freefly Handle
In addition to the new pouch design we have also invented a new type of handle for the throw out pilot chute, which we call the Freefly Handle. Here we have combined the low profile advantage of the "PUD" pull out system with the throw out pilot chute.
There is absolutely NO bridle exposure and the Freestyle Handle is easy to grab, whilst remaining tight and smooth with the bottom of the container and secured with our magnetic system.
Comfort
The Advance Seven back pad has been upgraded to an unbelievable level of comfort.
You can now fly your ADVANCE SEVEN in total comfort thanks to the introduction of our unique 3D Spacer foam backpad.
The difference compared to other containers using such foam is unbelievable.
The spacer and its inner foam is also used in the leg pads for even more comfort!
Use
The ADVANCE SEVEN can handle high speeds in all freefall positions and is 100% Freefly friendly.
Plastic tuck flaps are used for pin protection only, bridles are fully covered, main risers and freefly handle are protected by our unique magnetic system.
ADVANCE SEVEN IS DELIVERED WITH
True custom sized harness because you are unique.
Articulated harness
Stainless steel hardware.
Cut-in laterals
Cordura bottom of container pouch for hand
deployed pilot chute (or spandex if you'd prefer).
Collapsible PC.
Standard or Pillow Reserve Handle.
Mini-risers with velcroless toggles
Hook knife located under left hand 3-ring cover.
AAD ready.
Embroidery on right hand 3 ring cover.
Magnetic freefly handle
Magnetic riser covers
What more could you want?
Try one today!
After more than a year of testing, the engineers at BASIK AIR CONCEPT, are proud to release the ADVANCE SEVEN harness/container!
Construction
The true secret of Basik Air Concept success lies in our experience and our attention to detail.
We work to the absolute highest standards of design and build quality found anywhere in the industry.
Basik Air Concept is not the largest container manufacturer in the industry, but we are committed to being the best that there is.
Harness design
The ADVANCE SEVEN is designed to take your comfort to new levels whilst increasing the overall harness strength.
It is one of only a few systems on the market today that have passed the TSO-C23d standard.
This means that the ADVANCE SEVEN container system has been thoroughly tested and approved for heavier weights at higher speeds.
With the ADVANCE SEVEN your rig moves with you, not against you to ensure unsurpassed levels of fit and comfort.
The ADVANCE SEVEN harness was specifically designed to flex at the natural junction points of the human body.
This design has helped to eliminate harness buckling and twisting.
Your harness is then custom made to your unique measurements.
Reserve container
Our unique reserve container uses proven technology with the no side flaps configuration, one of the strongest pilotchutes in the industry and the AAD protected cutter directly under the pilotchute on the kicker plate flap.
These features give you the fastest reserve opening system ever seen.
The pilot chute spring force gives an energy which is maximised because of the 'no side flaps' concept.
Reserve bag
The unique design of the reserve freebag gives you ease of packing and durability.
The ADVANCE SEVEN uses the same material as your container.
It is very strong and resistant to wear and tear.
Riser covers
Most of todays riser cover systems have problems with them at some point.
The ADVANCE SEVEN riser covers were designed with our special flexible patented magnets incorporated into them.
Magnetic riser covers are a significant improvement over previous designs.
Not only does this feature provide added security in freefall, it also results in super clean openings as the tension on both riser covers is evenly distributed.
Hard Housings
By clamping the cable housing ends together, we ensure that your cables stay correctly routed without losing flexibility.
All hard housings are made from high-quality stainless steel.
Terminal ends
BASIK AIR CONCEPT has upgraded the cable housing terminal-end to a single piece cast stainless steel part which is only found in our harness systems.
These pieces are significantly more expensive than the other terminal ends (which are actually electrical connectors) used by the rest of the industry, but we believe they provide an extra degree of security in this critical safety area.
Pin protective flap
This has been revised for even better main pin protection and peace of mind!
The basic design remains the same,but the flap has been made wider for extra security.
Anti-Line Twist Main D-Bag
Line twists can be a real problem, especially with today's elliptical canopies.
We have reduced this problem with an innovative way of stowing the canopy lines.
The new bag keeps all lines and stows
This ensures line tension during deployment at the center of the bag instead of on the sides (otherwise the bag could oscillate back and forth - potentially leading to line twists!!).
Main container side flaps
We have made the main side flap ends curved to minimise the chance of a line snag during the main parachute deployment.
Throw out Pouch (BOC)
To avoid the hassle of replacing a spandex BOC pocket every 200-300 jumps, we also offer a new pouch which is designed for the container.
It is manufactured with the same material as the container to reduce wear and tear.
We have also developed a larger, spacious pouch to allow the pilot chute to be flattened, giving the bottom of the container a cleaner, sleek look.
It is secured using our unique magnetic security system with our Freefly Handle (Pud).
Freefly Handle
In addition to the new pouch design we have also invented a new type of handle for the throw out pilot chute, which we call the Freefly Handle. Here we have combined the low profile advantage of the "PUD" pull out system with the throw out pilot chute.
There is absolutely NO bridle exposure and the Freestyle Handle is easy to grab, whilst remaining tight and smooth with the bottom of the container and secured with our magnetic system.
Comfort
The Advance Seven back pad has been upgraded to an unbelievable level of comfort.
You can now fly your ADVANCE SEVEN in total comfort thanks to the introduction of our unique 3D Spacer foam backpad.
The difference compared to other containers using such foam is unbelievable.
The spacer and its inner foam is also used in the leg pads for even more comfort!
Use
The ADVANCE SEVEN can handle high speeds in all freefall positions and is 100% Freefly friendly.
Plastic tuck flaps are used for pin protection only, bridles are fully covered, main risers and freefly handle are protected by our unique magnetic system.
Compare the ADVANCE SEVEN with any other rig on the market and you will recognize that it offers outstanding value for money.
All popular features are included as standard in the base price giving you an instant transparent pricing structure and no hidden extra's.
ADVANCE SEVEN IS DELIVERED WITH
True custom sized harness because you are unique.
Articulated harness
Stainless steel hardware.
Cut-in laterals
Cordura bottom of container pouch for hand
deployed pilot chute (or spandex if you'd prefer).
Collapsible PC.
Standard or Pillow Reserve Handle.
Mini-risers with velcroless toggles
Hook knife located under left hand 3-ring cover.
AAD ready.
Embroidery on right hand 3 ring cover.
Magnetic freefly handle
Magnetic riser covers
What more could you want?
Try one today!